CCTV Digital Video Recorder

ACTi ACM-5001

This IP indoor camera is a cutting-edge digital video transmission device. It can compress and transmit real time images with outstanding images quality (VGA, 640x480) at reasonable bandwidth through a standard TCP/IP network. That is because it is Ethernet ready and has the powerful ARM9 SoC with excellent system performance to offer dual streams of MPEG4/MJPEG, and both formats offer megapixel resolution. In addition, with these powerful hardware platform, excellent SDK support and powerful respective apparatuses (e.g. the transcoder), this IP camera is an outstanding choice for building either a conventional IP surveillance system or intelligent IP surveillance system.

ACTi ACM-5001 Features

• Real-time MPEG-4 Compression With excellent system performance, MPEG-4/MJPEG are supported. It brings superior image quality 30 frame per second in full D1 resolution).
• Digital Time Code Embedded The “Digital Time Code Embedded” function is to embed the recording time in the MPEG bit stream. Therefore, each image frame has its respective time when it was recorded. It is very useful when users want to find the video at an exact time or between a certain time intervals.
• DDNS Supported This IP camera supports DDNS (Dynamic Domain Name Server), users can set this IP device at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video anywhere that has the access to the internet.
• Built-in Hardware Motion Detection No more external motion sensors are required. Each IP device can be set up to 3 detection areas. By tuning the object size and sensitivity, it is very reliable to fit into your environment. Besides, hardware motion detection delivers better sensitivity and responds faster than software motion detection.
• Bundle Powerful Surveillance Software To extend the capabilities of this IP device, a powerful surveillance program is included in the package and is very free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want.
• Software Development Kit Support This IP device can be integrated or controlled by user’s application program through the Streaming Library or ActiveX control. With its high level programming interface, software developer’s time and efforts to is highly reduced.

ACTi ACM-5001 Specifications

• Image Device Micron Progressive Scan CMOS Size 1/3 inch Effective Pixels 640 (H) x 480(V)
• Min. Scene Illumination Color 0.5 Lux at F1.0 (2400 ºK, 30 IRE) B/W N/A CDS Sensor N/A IR Sensitivity N/A
• Lens Lens Mount C /CS (with adaptor) Focal Length f4.2 mm / F1.8 Viewing Angle 75° (Horizontal)
• Synchronization Sync. System Internal
• Functions Motion Detection Yes (3 Windows) Electronic Shutter 1/5 ~ 1/15,000 sec Fixed Shutter (Manual) 1/30 ~ 1/1,000 sec. (60Hz); 1/25 ~ 1/1,000 sec. (50Hz) Flickerless 1/120 sec. (60Hz); 1/100 sec. (50Hz) BLC Yes AGC Automatic (User defined) White Balance AUTO, INDOOR1, INDOOR2, OUTDOOR1, OUTDOOR2, HOLD CURRENT, MANUAL
• S/N Ratio S/N Ratio Better than 44 dB
• Video Compression Compression MPEG-4 SP, MJPEG selectable Picture Resolution VGA (640x480) QVGA(320x240) QQVGA(160x112) Bit Rate 28 K ~ 3 M bps Image Frame Rate 30 fps at VGA resolution
• Audio Input Compression 8 kHz, Mono, PCM Audio Line Input Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
• Audio Output Compression 8 kHz, Mono, PCM Audio Line Input Unbalanced, 1.4Vp-p, 1Vrms, 3.5 mm Phone Jack
• Alarm Digital Input 1, terminal block Digital Output 1, terminal block
• External I/O Reset Button Factory default LED System status
• Network Ethernet Ethernet(10/100 Base-T), RJ-45 connector Protocol TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP,FTP,SMTP,DNS,DDNS,NTP,ICMP,IGMP,ARP
• Software Web Browser Microsoft Internet Explorer 6.0 or above SDK ACTi SDK-10000 Security Password protection: configured by the administrator
• Operating Temperature 0 ºC ~ 50 ºC (32 ºF ~ 122 ºF)
• Power Power Requirement PoE (IEEE802.3af) with Class 3 Power Consumption 3.3 W (DC 12V) 4.3 W (PoE)
• Physical Dimensions (WxHxL) 67 mm x 55 mm x 129.5 mm (2.64” x 2.17” x 5.10”) Weight 400 g (0.88 lb)
• Approvals Certificate CE, FCC