CCTV Digital Video Recorder

ACTi SED-2610

This powerful IP video server converts analog video signals into IP video streams. The IP video server can stream digitized video over IP networks in the same way that an IP Camera can. Because an IP Video server uses IP protocols, it can stream video over any network that IP can use, including via a modem for access over a phone or ISDN connection. With the use of a video server attached to an analog camera, the video from an existing surveillance system can be converted and networked into a new IP surveillance system. It can compress and transmit two channels of real time images with outstanding images quality (D1, 720x480) at reasonable bandwidth through a standard TCP/IP network. This video server also provide two-way audio streams along with each video channel. That’s because it is Ethernet ready and has the powerful ARM9 SoC and the MPEG-4 compression ASIC inside.

ACTi SED-2610 Features

• Real-time MPEG-4 Compression With hardware MPEG-4 compression chip inside, the composite video inputs can be efficiently compressed into MPEG-4 bit stream without any delay. The ASIC base compression engine can support not only CIF, but also FULL D1 image resolution.
• QoS Enabled Video Streaming For real-time video streaming requirements, the Video server implemented the 802.1pQ features inside the SoC as the streaming engine to make sure the video streaming package is forwarded faster than normal TCP/UDP packet.
• Automatic Frame Rate Control The Video server supports automatic/manual streaming frame rate control, especially for multiple clients concurrent access the same video stream in different network bandwidth.
• Digital Time Code Embedded The “Digital Time Code Embedded” function is to embed the recording time in the MPEG bit stream. Therefore, each image frame has its respective time when it was recorded. It is very useful when users want to find the video at an exact time or between a certain time intervals.
• Build-in Low Latency PPPoE Supported The Ethernet port is equipped with a low latency PPPoE (Point-to-Point over Ethernet) which has excellent transmission speed and enables the Video server to connect to an ADSL or a cable modem.
• DDNS Supported The Video server supports DDNS (Dynamic Domain Name Server), users can set the Video server at a virtual domain name (such as cam1.Taipei.xxx) at dynamic IP. Everyone can use the virtual domain name to view the video anywhere that has the access to the internet.
• Built-in Hardware Motion Detection No more external motion sensors are required. Each Video server can be set up to 3 detection areas. By tuning the object size and sensitivity, it is very reliable to fit into your environment. Besides, hardware motion detection delivers better sensitivity and respond faster than software motion detection.
• Bundle Powerful Surveillance Software To extend the capabilities of the Video server, a powerful surveillance program is included in the package and is totally free to use. Users can easily utilize the existing PC to be a digital video recorder. Schedule recording and manual recording keep every important image recorded in the local hard disk. Reliable and accurate motion detection with instant warning makes you responsive in every condition. Quick and simple search and playback function lets you easily find the images you want.
• Software Development Kit Support The Video server can be integrated or controlled by user’s application program through the Streaming Library or ActiveX control. With its high level programming interface, software developer’s time and efforts to is highly reduced.

ACTi SED-2610 Specifications

• Video Compression Compression MPEG-4 ASP Compliant Picture Resolution Full D1 (720 x 480 in NTSC, 720 x 576 in PAL); CIF (352 x 240 in NTSC, 352 x 288 in PAL); QCIF (160 x 112 in NTSC, 176 x 144 in PAL) (per channel) Bit Rate 28K ~ 3M bps (per channel) Image Frame Rate 30fps at full D1 resolution (NTSC) 25fps at full D1 resolution (PAL) (per channel) Multi-stream Up to 4 configurable frame rate/bit rate streams for preview and recording (per channel)
• Video Input Composite Input 8, CVBS, 1.0Vp-p with 75Ω loading, BNC connector
• Audio Input Compression 8kHz, Mono, PCM Audio Line Input 8, Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Phone Jack
• Audio Output Compression 8kHz, Mono, PCM Audio Line Output 8, Unbalanced, 1.4 Vp-p, 1Vrms, 3.5 mm Phone Jack
• Alarm Digital Input 2 , TTL, terminal block (per channel) Digital Output 2 , TTL, terminal block (per channel)
• Remote Control Serial Port RS-485: half duplex, terminal block RS-422: full duplex, terminal block RS-232** : full duplex, terminal block (per channel)
• External I/O Reset Button Factory default LED System status
• Network Ethernet Ethernet (10/100Base-T), RJ-45 connector Protocol TCP, UDP, IP, HTTP, DHCP, PPPoE, RTP, RTSP, FTP, SMTP, DNS, DDNS, NTP, ICMP, IGMP, ARP
• Software Web Browser Microsoft Internet Explorer 6.0 or above SDK ACTi SDK-10000 PTZ Protocol* Pelco-D, Pelco-P V1 and V2, Dynacolor, Sony VISCA, American Dynamics Security Password protection: configured by the administrator
• Power Power Requirement AC 100 ~ 240V 50 / 60 Hz Power Consumption 60 W
• Physical Dimensions (WxHxD) 434 mm x 44.3 mm x 236 mm (17.09” x 1.744” x 9.295”) Weight 4.2 Kg (9.26 lb)
• Approvals Certificate CE, FCC