Security-Kits :: American Dynamics :: AD Quads - Multiplexers And VCR's :: American Dynamics Multivision Quest Color Duplex Multiplexer Available in 4, 9 & 16 Channels

American Dynamics Multivision Quest Color Duplex Multiplexer Available in 4, 9 & 16 Channels

You Save 6%

SKU: DVM94Q

Your Price: $829.00

Qty:

Total Channels

Overview Features Specifications

AMERICAN DYNAMICS MULTIVISION QUEST DUPLEX MULTIPLEXER

The Multivision Quest Duplex series offers advanced features not typically found in standard multiplexers. The duplex capability allows users to view live or recorded video while also recording at the same time. Video inputs can be programmed as covert so that certain cameras are recorded but not viewable on the monitors.

Three types of alarm events are supported: video loss, alarm inputs via the rear panel, and motion detection. Motion detection for each individual camera is programmed via a detection grid. Each alarm event can be programmed to put the multiplexer into alarm mode, which can result in onscreen alarm text, an internal buzzer sounding, and a relay being triggered. Triggered alarm inputs can be programmed to increase the camera record rate. Alarm dwell time is user selectable from 1 to 9,999 seconds. In addition, as these events occur they are stored in a non-volatile event history log. The most recent 255 events are kept in the list.

For installations where cameras are located at long distances and video signal integrity is affected, the gain control for each individual camera can be adjusted to restore picture quality.

The multiplexer has two passwords: one for resetting the unit to factory settings, one for configuring the unit during installation.

AMERICAN DYNAMICS MULTIVISION QUEST FEATURES

4, 9 and 16-channel versions
B/W and color models
720 x 480 (NTSC) / 720 x 576 (PAL) pixel display with 256 grays and 16 million colors
Covert camera programming
Intelligent video motion detection
History log for up to 255 alarms, video loss or motion detection events
User-friendly on-screen menus
Two levels of password protection
Adjustable gain control for each camera
Ability to freeze live and recorded images
Up to three pre-programmed main monitor sequential switching modes

AMERICAN DYNAMICS MULTIVISION QUEST SPECIFICATIONS

Model Numbers

DMV94Q: Duplex, 4 channel, color multiplexer. 120VAC, NTSC
DMV99Q: Duplex, 9 channel, color multiplexer. 120VAC, NTSC
DMV96Q: Duplex, 16 channel, color multiplexer. 120VAC, NTSC
DMV94Q-1: Duplex, 4 channel, color multiplexer. 230VAC, PAL
DMV99Q-1: Duplex, 9 channel, color multiplexer. 230VAC, PAL
DMV96Q-1: Duplex, 16 channel, color multiplexer. 230VAC, PAL

Accessories

MQRPNL: Remote Panel, 60/50Hz

Operational

Video Inputs: 4, 9 or 16 depending upon model
Video Resolution: 720 x 480 display (NTSC)

720 x 576 display (PAL)

Display Formats: 1, 4, and 9 windows (9 Channel)

1, 4, 9, and 16 windows (16 Channel)

Gain Control: 1 to 16 (70 to 150%)
Motion Detection Grid: 192 points,16 horizontal x 12 vertical
Motion Detection Settings: Adjustable sensitivity
Event History Log: 255 alarm contact, video loss or motion detection events
Alarm Duration: Programmable 1 to 9,999 seconds

Video Inputs/OutputsM

Video Inputs: 4, 9 or 16 looping composite, 1Vp-p, selectable 75 O or High-Z, BNC
VCR Input: Composite, 1Vp-p, 75 O, BNC

S-Video, 1Vp-p, 75 O, 4-pin mini-DIN

VCR Output: Composite, 1Vp-p, 75 O, BNC

S-Video, 1Vp-p, 75 O, 4-pin mini-DIN

Main Monitor Output: Composite, 1Vp-p, 75 O, BNC

S-Video, 1Vp-p, 75 O, 4-pin mini-DIN

Call Monitor Output: Composite, 1Vp-p, 75 O, BNC

Connectors

Alarm Input: 4, 9 or 16, one per camera, programmable as normally open or normally closed
Common Alarm Output: One normally open or closed form C relay, 0.5A/120VAC or 2.0A/24VDC
VCR Trigger: One, TTL input
Set Alarm: One, contact closure or TTL/CMOS input
Reset Alarm: One, contact closure or TTL/CMOS input
RS-485: Two, RJ-11 ports
Remote Panel: One, RJ-45 port